Earth Safe Finishes Candle Crete Concrete Sealer (Clear, 32oz)

Candle Crete Sealer is a sealer engineered for hard to coat surfaces like concrete, terra cotta, brick, gypsum, Cement-All, Hydrostone, plaster & more. Just as importantly though, it doesn’t yellow, forms a durable barrier and is non-flammable and safe for use with candles. Candle Crete Sealer provides a durable seal that is UV resistant and water repelling. Best of all, it’s bio-based, eco-friendly and completely FREE of VOCs, heavy metals, toxins, and solvents. Our products are Made in the USA and never tested on animals. Easy application, you can apply by brush, sponge or wipe on, or use as a dip for your containers. Brush, sponge or wipe instructions: Apply to your piece that has is clean from dust and debris. Let dry, you may add 2nd coat after at least 30-60 minutes. Let it dry and cure for 3-4 days. It is best to test a sample jar first to adjust method of application. Use between 60-80 degrees F. Keep used liquid separate from original container. Instructions when using as a dip: To use, stir thoroughly and pour into a container large enough for your piece, Gently roll or dip cement piece that is free from dust or debris making sure to cover entire the entire surface for about one minute to let sealer absorb. Gently remove, allowing the excess liquid to drain, and place it on a wire rack to dry. Check for drips after 10 minutes, and touch up if necessary. Let dry, you may add a 2nd coat after at least 30-60 minutes. Let dry for 3-4 days. It is best to test a sample jar first to adjust method of application. Use in temperatures between 60-80 degrees F. It is very important to keep used liquid separate from the original container as to not cross contaminate your new sealer. Use ESF No VOC Varnish for exterior protection.

• Sealer to use on all types of concrete
• Water based, non-toxic, non-flammable
• Eco Friendly, no VOC's, no heavy metals, no toxins and no solvents
• Clean up with soap and water
• Made in USA